TOTALFLOW TF-U200 U-Bolt | Saddle Exhaust Muffler Clamp Band | 2 Inch

Manufacturer: TOTALFLOW
SKU: TF-U200
UPC: 816264021886

Stainless Steel FinishOne (1) Year Limited Warranty

Availability: In Stock!
+ -
Products specifications
Material304 Stainless Steel
Clamp TypeU-Bolt
Clamp Size2"
FitmentUniversal Fitment

TOTALFLOW heavy duty corrosion-resistant 304 Stainless Steel U-Bolt Saddle Exhaust Muffler Clamp Band are one of the best solution for your car and motorcycle exhaust custom job, providing a leak free seal that the professional installers use.

  • Made from - Heavy Gauge - 304 stainless steel muffler exhaust muffler clamp band.
  • Available in a wide range of styles and sizes.
  • Helps to ensure a leak free connection.

Safety Warning
TOTALFLOW® Recommends the installation of this product at professional facility.

⚠ WARNING: This product may contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information please go

Customers who bought this item also bought
Write your own review Close Review Form
Sturdy but sizes inaccurate.
Using it for a non-muffler application. Size listed is way off. Purchased 2" U-bolt. Actual inside dimension is 2-5/16". A pretty sloppy fit on a 2" OD pipe. The saddle is a different size than the u-bolt. Saddle ID was about 2-1/8" on some and 2-3/16" on two others. In addition, the saddle edges weren't aligned with each other. In most applications these incorrect sizes may not matter. In my case I will make it work but it certainly doesn't fit as expected. I bought the stainless steel for "looks". Sloppy is what I got.
| 1/29/2020
Was this review helpful? Yes No (1/0)
Sizes are for pipe Inside diameter.
It says 2" but that must be the inside diameter as the 2" is actually 2 1/4" or I had to reorder 1 3/4 for my 2" od pipe.
| 1/27/2020
Was this review helpful? Yes No (1/0)
Expensive but needed. Good quality
Easy to install for what I needed. A tad on the expensive side but I needed it. Came pretty quick. Good quality
| 10/30/2019
Was this review helpful? Yes No (1/0)
Do The Job - Might Consider Others
Does the job well enough; good material and value. I didn't order enough so I had to go grab some from O'Reilly's and I found the O'Reilly's ones were -much- easier to torque down tight. Different thread pattern or u-bolt diameter maybe? Regardless, they did their job. Just required a little extra finesse to tighten up.
| 10/5/2019
Was this review helpful? Yes No (0/1)
| 9/18/2019
Was this review helpful? Yes No (1/0)
C'était parfiat pour ce quee j'aivais besion
| 9/16/2019
Was this review helpful? Yes No (1/0)
Works for me
Got this to clamp on spark arrestor on my sand rail exhaust pipe. Stainless steel material does the job and price is reasonable.
| 8/22/2019
Was this review helpful? Yes No (1/0)
Metric threads; watch the size
I have the "2 inch" size. Between the threads it's actually 2.20. And the threads are METRIC, M10 x 1.5, with 16 mm nuts, which just happen to fit a 5/8 wrench real nice. So don't lose the nuts!! I'm not using for a precision fit on an exhaust system, so these are just fine. Very robust.
| 6/22/2019
Was this review helpful? Yes No (1/0)
These are very nice clamps
I am using these outside and they are impressive just to look at. The quality appears to be very high.
| 6/1/2019
Was this review helpful? Yes No (1/0)
Not 2 inch
I was expecting a 2” internal diameter. This is 2.25” and I cannot use it. Would exchange or refund.
| 5/13/2019
Was this review helpful? Yes No (1/0)
Good value
Good value, decent for cheap SS clamp.
| 4/22/2019
Was this review helpful? Yes No (1/0)
High quality clamp
This clamp is a good choice in Stainless pipe or non stainless applications.
| 1/22/2019
Was this review helpful? Yes No (1/0)
Five Stars
high quality - good price
| 7/3/2018
Was this review helpful? Yes No (1/0)